Mortar pumps

Printer-friendly versionPrinter-friendly version

The presented mortar pump series is developed and made by factory "Remstroydormash" which are intended for transportation and spray application a plaster solution on a work surface with fraction size no more than 5 mm and mobility not less than 8 sm on a reference cone of GOST 5802-86 by manufacture of painting and decorating in construction.

Advantage of pumps is that the case and components are made of steel (completely there is no moulding). Thus the repair base such mortar pump is minimal.

Characteristics:

The name Units СО-49P СО-49PA СО-49P2 СО-50D СО-50DM СО-49D
Common characteristics
Productivity m3/hour 3,0 4,0 3,0/4,0 6,0 6,0 4,0
Solution clipper   ОР-50
− Dу mm. - 50 - - - -
− pressure (max) MPa. - 45 - - - -
Ball stopcock:
− Dу mm. 38 38 38 38 38
− pressure (max) MPa. 40 40 25 25 16-25
− Working presure (max) kgs/sm2. 35 35 30 25 25 15
Submission distance of a solution
− across horizontal, no more m. 250 300 250 250 250 160
− across vertical, no more m. 100 120 80 60 60 35
Piston motion mm. 90 120 90 -
Plug motion mm. - - - 120 120 90
Cylinder sleeve lenght mm. 188 220 188 - - -
Piston diameter mm. 100 100 100 - - -
Plug diameter mm. - - - 110 110 90
The hatch for replacement of the ball - + - - - -
Oil crankcase of gear pair - - - - + -
Rubber-covered ball, diameter mm. 50 & 70 50 & 70 50 & 70 70 & 70 70 & 70 60 & 60
Overall dimensions
– length mm. 1400 1400 1400 1250 1350 1020
– width mm. 700 700 700 500 550 420
– height mm. 1100 1100 1100 1230 1430 1240
Mass kg. 400 400 405 370 400 190